35HM107-1 is the marked Klixon motor protector shown in the gallery. The photographs include the metal housing, tab profile and terminal end. Condition on request. Use the images to identify the physical configuration and prepare an exact purchase enquiry. They do not certify a trip setting, assign terminal functions or establish compatibility with a particular motor.
Start with the photograph that shows the end of the housing rather than looking only at the stamped side. Note where the visible terminals are located relative to the can. For a tab terminal motor protector, the orientation and profile of the tabs can matter to the approved assembly even if the housing appears identical. Ask for a dimensioned reference or an inspection sample when the purchaser needs to establish more than a visual resemblance.
The profile view shows the housing and the relation of the tabs to its edge. Use it to check whether the proposed unit deserves a closer review, not to derive spacing from pixels. If a terminal is hidden by the angle, request an additional view of the actual offered unit. Describe the feature the reviewer is trying to verify so the supplier can take a useful photograph. Keep any assumptions about the electrical role of the terminal out of the purchase description.
Keep 35HM107-1 intact in the order, receiving checklist and equipment record. A search for the family name will often return other numbers with a similar outline. Do not remove the final 1 or assume that another configuration ending in 1 has the same protective setting. If an offered part differs from the requested Klixon 35HM107 motor protector, ask the supplier to state the other model as an alternate instead of editing the existing order reference.
When a body mark is faint, use a photo of the exact device from a different angle or ask the equipment owner for the approved parts list. Note which characters were read directly and which came from a secondary record. If the two sources disagree, have the responsible reviewer settle the discrepancy before accepting the offered tab terminal motor protector. A readable family name does not resolve a difference in the full number.
Sensata describes the 35HM family as hermetic on winding protection for three phase motors. That does not establish the calibration, dimensions or approved application for this specific device. Identify the approved equipment revision and review any operating requirements against the exact documentation. A Klixon 35HM107 motor protector quotation can be evaluated for identity before the equipment owner has completed an application review. Keep the two decisions separate on the purchase file.
A motor reference, manufacturer drawing and inspection photo each answer a different question. The motor reference tells the buyer what assembly is involved. A drawing or specification defines the part that can be accepted. A photo can show what was actually offered. Do not use an appealing image to fill a missing technical value. If only an identification sample is being considered, make that scope clear so it cannot be mistaken for authorization to install it.
Record which sample checks will be repeated on the balance. If the balance arrives in a different package or is offered from another lot, ask what evidence applies to the shipped parts. The receiving team should have a copy of the exact order reference, label photo and agreed inspection requirements. An unmarked or mismatched unit should remain separate until someone with approval authority has reviewed it. Photos are not a guarantee of condition or an inventory statement.
After reviewing the quote, record the exact offered reference, the equipment revision and the physical evidence checked. If an alternate is accepted for a limited repair, note that limit rather than changing the general stock description. A decision for one assembly does not automatically apply to other equipment. Keep the record together with the photo of the body mark so the next buyer can identify the exact unit even if the outer package is different. Any unclear terminal or calibration question should remain assigned to the responsible reviewer.
No. Ask for its full number and record the offer separately. The equipment owner should approve any proposed replacement for the Klixon 35HM107 motor protector.
No. A tab terminal motor protector may look familiar but differ in application or calibration. Check the approved mechanical and electrical documentation rather than inferring it from the gallery.
Use Request a Quote for 35HM107-1. Include the quantity and destination, then describe the marking or terminal angle you need to compare. Ask the supplier to identify the Klixon 35HM107 motor protector against the actual offered lot.
Explore premium ICs, sensors, and power controls to support your advanced technical requirements.