A short description such as CEJ protector is not enough to buy the part shown here. The body and the photographed motor protector carton identify the HR version as CEJ-18-HR. Use that full reference if the order must match an approved component list. The individual photos also show the contact side and the opposite face. Together they let the buyer ask a more precise question than whether a black protector with the same outline is available.
Start with the single device, not the image of parts inside the carton. The single device is where you compare the visible contact layout and the shape of the base. Next look at the opposite face to record the outline from another angle. Finally read the carton label and compare it against the requested part number. The group photo is context for how the photographed parts were presented, not a count of available pieces. The carton image is not a guarantee of the packing that a future shipment will use.
For a Klixon CEJ motor protector, a picture that shows the body but not the identifying characters has limited value. If there is a difference between the markings on a carton and the device, ask the supplier to transcribe both as they appear. Keep any extra reference text on the label in the receiving notes. Do not remove a suffix from the actual requested number just because a stock system uses an abbreviated search term.
Keep CEJ-18-HR separate from CEJ parts with another ending. A matching case profile is not proof of the same electrical characteristics, protective setting or reset behavior. If a sourcing agent offers a similar looking unit, place that offer in a separate column marked alternate. Send the full reference to the person who owns the equipment configuration. Do not substitute a number from another CEJ model in the order line simply because a supplier has pictures of it.
An exact device reference is the starting point for choosing a motor overload protector, not an approval to install it. Have the equipment owner verify the required motor protection behavior using the approved device or assembly documentation. The gallery does not establish a temperature set point, current calibration, wiring or the role of the visible contacts. If the buyer does not have the exact requirements, ask for an identification response first rather than committing to a replacement based on a family name.
Make a sketch or use the approved equipment drawing to record the position of the original unit. Compare the outline of the photographed Klixon CEJ motor protector, the visible terminal arrangement and the retaining features with that reference. Keep the mechanical comparison separate from the electrical approval. The page shows both faces, but the photos do not provide a verified drawing, terminal assignments or a mounting procedure. If the fit matters to a service order, ask for the exact documentation or an inspection sample.
When more than one appliance or motor is being serviced, assign the requested protector to the correct equipment model or revision in your request. Otherwise two visually similar parts may be picked from the same bin at the next maintenance job. A good receiving record contains the approved part number, the inspected body marking and the quote line from which the part came. Put any incomplete identification on hold before the part is released for service.
| Item | What the buyer should specify |
|---|---|
| Exact part | CEJ-18-HR, including HR. State whether an alternate may be quoted separately. |
| Equipment | Approved equipment reference and any drawing or label used to identify the original motor overload protector. |
| Evidence | Request an offered device marking and any additional carton, packing or inspection information needed for acceptance. |
| Order scope | Sample quantity, order quantity, delivery destination and target date. |
If the quote is for a pilot quantity of a Klixon CEJ motor protector, agree which visual comparison or documentation review the sample is meant to settle. The receiving team should be able to repeat the same identity check on the balance. If the balance comes in different packing or from a different offered lot, obtain the evidence required by your receiving procedure. A sample can resolve a fit question without proving the condition or availability of any additional stock.
Record the check in the order it was actually performed. Note which device image was compared, which characters were read from the body, and which extra text came only from the carton. Attach an image if the body marking is shallow or difficult to read. Then say whether any unit was sampled or whether the review was limited to pictures supplied with the quote. The distinction is useful when a second delivery arrives under the same purchase reference. It lets the buyer compare what was agreed without having to infer the earlier decision from a photograph of several unmarked parts.
No. The base is a useful visual cue but should not replace the complete part number or the approved equipment reference. Request clarification if the suffix or terminal arrangement differs.
No. Ask for the quantity actually offered, the proposed packing and any conditions relevant to the order. Photos are for identifying the Klixon CEJ motor protector, not confirming stock.
Use Request a Quote for CEJ-18-HR. Give the destination and the required quantity, then say which marking, packing and inspection evidence must be included. State clearly if another motor overload protector must not be offered as a replacement.
Explore premium ICs, sensors, and power controls to support your advanced technical requirements.