Your Trusted Partner in Electronics Supply Chain. Inquire Now!

Explore Our Latest Smart Electronics Collection.

cej-73-aln-klixon-motor-protector, cej-73-aln-klixon-motor-protector, /circuit-protection
Inquiry
Inquiry

CEJ-73-ALN Klixon Motor Protector

Request a Quote
  • Overview

Overview

The unit shown is marked CEJ73ALN. Use CEJ-73-ALN as the full ordering reference for this Klixon ALN motor protector. The first photo shows the marking and terminal face of an individual piece. The second shows several pieces together, but does not establish the identity or condition of each piece. Condition on request. Ask for evidence tied to the units offered in your quote rather than assuming the group photo covers the entire shipment.

Resolve the ALN code on the service request

Put the original equipment reference, the marking read from the removed part and the requested ordering number on separate lines. This is useful if a technician writes the compact mark without punctuation while the parts system uses hyphens. For a marked CEJ motor protector, a search result may help identify a candidate, but it does not resolve a missing character. If only AL is legible, leave the final character open until the original equipment record or a clear device photo confirms it.

Retain both 73 and ALN when comparing supplier responses. Do not accept an EM, HR or DV ending as a formatting difference. Ask the seller to name any alternate explicitly and give it its own quote line. Keeping alternatives separate lets the equipment owner compare them without accidentally changing the requested part number. If the equipment maker has approved a substitute, retain that decision with the particular equipment revision rather than treating it as a family-wide cross reference.

Use the close view to request better evidence

The individual image shows the dark housing, visible terminal features and the stamped characters. Ask for the same face on the offered unit if you need to read the mark or compare the position of the terminals relative to the housing. If a bracket or cover limits access in the original assembly, give the reviewer the relevant approved drawing or a photograph of the original part. Do not estimate dimensions from an image with no scale.

A similar terminal face is not proof of the same configuration. The photos do not specify terminal function, reset behavior or the calibration required by your motor. For a Klixon ALN motor protector purchase, list the technical requirements that the equipment owner still needs to verify. If those requirements are not available, request help identifying the part or ask for a comparison sample instead of approving it for installation. Do not read the number 73 as a rating without documentation for the exact reference.

Tell the supplier how the lot will be checked

For a purchase of several pieces, say whether your procedure accepts a representative marking image or requires evidence from each identified group. The second photograph of CEJ-73-ALN provides context for the pictured stock, but not a count of pieces currently available. Ask which parts are actually offered and how they will be packed. If different groups must stay separate, state how you want them identified and what information should follow each group when the parts are received.

Define the purpose of a sample before sending the order. A buyer may use a sample of the marked CEJ motor protector to check the lettering and housing, while a qualified reviewer separately checks whether any additional documentation is needed. If the balance will not be drawn from the same offered lot, record which checks must be repeated. A sample accepted for appearance alone is not approval of the operating behavior of the part or of every unit in a later delivery.

Information to include in your RFQ

  • Specify CEJ-73-ALN and whether you require an exact match or will review separately quoted alternatives.
  • Give the approved equipment or spare reference and identify the photo angle required for the Klixon ALN motor protector.
  • List sample and order quantities separately, and include the destination and target receipt date.
  • Request the offered condition, packing and quantity, and state any marking or lot evidence required for the marked CEJ motor protector.

Keep the identity record when stock is split

At receipt, compare the accepted quote with the marking on the actual item. Record the evidence that supports the comparison, such as the approved equipment reference and the offered unit image. If the units will go into separate service kits, keep the exact reference with each allocation rather than relying on the outer bag. Hold any piece with an unclear or different marking for review. These steps document identity; they do not replace the equipment owner's approval or a required functional test.

Common questions before accepting the offer

Is a clear ALN mark enough to order a replacement?

Read the whole mark and compare it with the approved record. The suffix by itself does not identify the full Klixon ALN motor protector or establish compatibility.

Can I use the group image as proof of condition?

No. Ask for the condition of the actual offered material and any photographs required by your receiving procedure. Do not infer that the parts are unused or originally packaged.

What if the supplier offers a different marked CEJ motor protector?

Request the exact proposed identifier and its supporting documentation on a separate line. Have the equipment owner approve the substitution before treating it as the requested part.

Use Request a Quote for CEJ-73-ALN. Include quantity, destination and the marking evidence you need before accepting the offer.

CEJ-73-ALN Klixon Motor Protector

Request a Quote
{"cf_related_products":{"field_type":"product","type":"array","value":[],"config":""}}

Related Products

Explore premium ICs, sensors, and power controls to support your advanced technical requirements.

cej 73 aln klixon motor protector-2

Get a Free Quote

Our representative will contact you soon.
Email
WhatsApp / Mobile Phone
Company Name
Part Number
Message
0/1000
Attachment
Please upload at least an attachment (Optional)
Upload up to 5 files (maximum 30 MB). Supported formats: JPG, JPEG, PNG, PDF, DOC, DOCX, XLS, XLSX, CSV, TXT, STP, STEP, IGS, X_T, DXF, PRT, SLDPRT, SAT, RAR, ZIP.